Pressure control valves
Performance graph
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
3.02.003.1
spring 3
spring 2
spring 1
TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
P08M-21
Relief valve, direct acting, differential area,
poppet type
Description
Pressure relief valve direct acting differential area, designed for
application where good performance of pressure increase vs flow
and pressure adjustment is requested. The valve can be used also
as a safety device to limit the pressure of the circuit.
Operation mode
The valve consist in a body, poppet and spring. Pressure is manu-
ally set by the adjustment screw. The spring pushes the pilot stage
into the closed position. When the pressure exceeds the spring
force, valve opens allowing flow from port 2 to 1.
GENERAL DATA
Weight: 0,094 Kg (0,2 lbs).
Ambient temperature range: -30 °C a 60 °C with seals standard (NBR).
Max proof pressure in port 1: 50 bar (725 psi).
Max proof pressure: 420 bar (6.090 psi).
Flow Max: 30 l/min (7,9 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 350 bar (5.000 psi)
Flow rate: See performance graph
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage:*: 0,75 cc/min (15 drops/min)
Standard seals: O-ring NBR Backup ring PTFE
Cavity: SCN0820
Installation torque: 27 Nm
Installation torque
nut Hex. 10:
4 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seals kit std.: 5AG0024
*Note: The leakage are to be considered at a pressure equal to 80% of the setting request.
0
50
100
150
200
250
300
0
0
1000
2000
3000
4000
0 5 10 15 20 25 30
1,3 2,6
45,36,6
7,9
lpm
gpm
Flow
Pressure
bar
psi
1
2
2
1
None (std. Hex
socket srew)
T- Tamper Proof
Adjustment options
Spring setting
A- Aluminium
Material std. housing
S- Steel
Y- Polyurethane
Inches
Millimeters
Dimensions
For other options
contact Sales dept.
T-Tamper proof
Seals
Valve Setting*
None (Valve not set)
S100- Setting
in bar (100)
STANDARD HOUSING
Ordering code: See page 9.02.001
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
--
--
None (std. only cartridge)
2B- 1/4” BSP
3S- SAE 8
3B- 3/8” BSP
2S- SAE 6
Housing size ports
None (std. NBR)
*Note: Settings are performed at a flow rate
of 4 l/min.
Range
bar-(psi)
Pressure increase
bar/turn (psi/turn)
1
20-100 bar
(290-1.450 psi)
30 bar
(435 psi)
2
50-200 bar
(725-2.900 psi)
80 bar
(1.160 psi)
3
150-350 bar
(2.175-5.075 psi)
150 bar
(2.175 psi)
3.02.003.2TCGE-0524-IR00
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
P.IVA/C.F 02573790355







81)$
+H[


+H[


+H[



















5








P08M-21
P08M-21



